Sand gravel pump with diesel engine General Information The G type Dredge and Gravel pumps is designed to provide continuous pumping of highly abrasive slurries containing large particles at high maintained efficiencies with low maintenance and ownership costs.Send InquiryChat Now
Sand gravel pump with diesel engine
The G type Dredge and Gravel pumps is designed to provide continuous pumping of highly abrasive slurries containing large particles at high maintained efficiencies with low maintenance and ownership costs.
● Heavy duty grease lubricated taper roller TimKen Bearings.
● High Chrome 27% Wet ends parts.
●Enhanced abrasion resistance
●Meeting international standards
● Heavy duty design 4140 material shaft
● High strength cast iron bearing housing
● Side sealing vanes on the shaft side of the impeller reduce gland pressure and intrusion of solids into the gland area
●The special shape of the impeller vanes and casing combine with side sealing vanes to reduce recirculation down the front of the impeller and exclude abrasive solids from between the impeller and casing.
●The large volume of the casing reduces internal velocities resulting in reduced wear.
●Simple impeller adjustment is achieved using a very robust one piece casting that cradles the bearing cartridge assembly with a conveniently located adjustment facility. It also supports the pump wet end using a minimum number of through bolts.
●An easily removable shaft sleevemanufactured in either hardened steel or ceramic coated steel with o-ring seals at both ends protects the shaft from abrasive or corrosive contaminants
Performance & Specifications
Max. Particle Size
● Sand and Gravel
● Hydraulic Mining
● Water treatment plants
● Sugar beet & other root vegetables
● Chemical / Processing
● Slag Granulation