Diesel engine dirven gravel sand pump isare robust state of the art slurry pumps that feature oil or grease lubrication bearing assemblies and complete interchangeable with other major brands. The sand pump can be supplied in either a packed gland version using expeller technology, or mechanical seal system specifically designed for heavy duty slurry applicationsSend InquiryChat Now
1.Product introducation of diesel engine driven gravel sand pump
Type G pumps is single-stage single-suction horizontal centrifugal pump, connected by belt. It is light, good anti-cavitation performance and easy to install.It is applied to conveying of sands, mud and slurry with bigger solid partices.
Gravel pump is consisted by casing, seal devices, bearing devices and frame. It is lubricated by grease. The materials of working parts are wear-resistance alloy or alloy steel, the hardness is no less than 58HRC.
2.Products specification of wear resistance sand suction pump
MG Clean Water Performance
Allowable Mating Max.Power
Interrupted by the maximum particle
3.Product Performance curve of wear resistance sand suction pump
4.Details of wear resistance sand suction pump
5.Product Feature of wear resistance sand suction pump
1 Bearing assembly:large diameter shaft with short overhang contributes to long bearing life;
2 Liners:Easily replaceable liners are bolted, not glued to the casing for positive maintenance;
3 Casing:Casing halves of cast or ductile iron provide high operating pressure capabilities;
4 Impeller:Front and rear shrouds have pump out vanes that reduce recirculation and seal contamination;
5 Throatbush:Wear is reduced and maintenance simplified by the use of tapered.