Impeller Number:Single-Stage Pump
Working Pressure:Low Pressure Pump
Influent Type of Impeller:Double-Suction Pump
Position of Pump Shaft:Horizontal Pump
Pump Casing Combined:Horizontal Split Pumps
Mounting Height:Since Irrigation Centrifugal Pumps
Transport Package:Ply-Wooden Case
MS series pump are new type of horizontal single stage double suction centrifugal split case water pump with high efficiency and performance. It is widely used in delivering liquids for water plant, circulation water system of air conditioner, pipe net system of supplying heated water, construction, watering, drainage pumping station, power station, industrial water supply system, firefighting system, shipbuilding, mining, etc.
Outlet Dia.: DN80 - 1400mm
Capacity: 10-20000 m3/h
Head: 7 - 220m
Working Temperature: -20~160 °C
Working pressure: less than 2.5Mpa
Solid grains: less than 80mg/l
Wide performance range, superior hydraulic performance, high efficiency and reliability,low cavitation and low cost for maintenance.
MS pumps are horizontally installed, the casing and the cover of the pump are divided along the axis. The centerline of inlet and outlet is perpendicular to the axis.
The rotor can be removed without disturbing the inlet pipe and the outlet pipe.
Packing seals or mechanical seals.
Material of main parts
Pump case: cast iron.
Impeller: cast iron, can be cast steel or brass as per customer's requirements.
Pump, Motor, Coupling joint, Foundation plate and Mounting resistant cushion will be provided when inlet diameter of pump less than 200mm. When inlet more than 200mm, will provide pump, motor, coupling joint only.