Milestone Pump Co., Ltd ONLY PUMP, MORE THAN PUMP
Home » News » Content
Product Categories

Close-Coupled End Suction Centrifugal Water Pump

- Sep 16, 2017 -

Basic Info

  • Model NO.: XS

  • Max.Capacity: >400 L/min

  • Impeller Number: Single-Stage Pump

  • Influent Type of Impeller: Double-Suction Pump

  • Pump Casing Combined: Horizontal Split Pumps

  • Impeller: Closed

  • Material: Cast Iron, Cast Steel, Stainless Steel

  • Seal: Gland Packing Seal

  • Spare Parts: with Oil Meter, Temp Meter, Speed Meter, Run Hours

  • Application: Mine, Urban Water Supply, Electric Power, etc

  • Head: 5-150m

  • Trademark: Sundream

  • Specification: CE, SGS, ISO9001

  • HS Code: 8413709990

  • Max.Head: >150m

  • Driving Type: Motor

  • Working Pressure: High Pressure Pump

  • Position of Pump Shaft: Horizontal Pump

  • Mounting Height: Suction Centrifugal

  • Usage: Pumps

  • Power: Diesel Engine and Electric Motor

  • Engine Brand: Deutz, Water Cooled, Cummins

  • Type: Horizontal Split Case Pump, Double Suction Pump

  • Medium: Clean Water and Any Liquid

  • Flow Rate: 100m3/H- 13000m3/H

  • Transport Package: Export Polywood Case

    Product Description

    We are professional manufacturer for Horizontal Split Case Pump, Double Suction Pump with high and stable quality, and we have made many water pump solutions for many customers.

    General Description:
    Tpye SH, XS Split Case Pump/Double suction pump is new type of single stage double suction split case centrifugal pump with high pefformance. They are widely used in delivering liquids to the water plant, circulation water system of airconditioner, pipe net syetem of supplying heated water, construction, drainage
    Pumping station, power station, industrial water supply system, ship industry, mine and etc. Type SH,
    XS split case pump is advanced products developed from type SH. S. SA. SLA. SAP pumps.

    Split Case pump, The technical parameter of pumps:

    Speed: 990, 1480 and 2960 r/min
    Voltage: 380, 6K/10KV
    Inlet and Outlet: 150~600mm
    Flow range: 68~3975m3/h
    Head range: 6~180m
    Fuel: Diesel
    Engine: DEUTZ engine, water cooled

    Temperature range: Maximum temperature ≤ 100 ° C of the liquid, a special configuration of up to 150 ° C, ambient temperature ≤ 40 ° C
    Maximum working pressure (inlet pressure pump pressure +): 1.0MPa (Hsp ≤ 75m) or 1.6MPa (Hsp>75m)
    Special configurations can be respectively 1.6MPa or 2.5Mpa
    Allows transportation media: Clearwater physicochemical properties similar to the branch water or other liquids
    Sealed pipe parts: Inlet pressure ≥ 0.03 Mpa without installation

    1. Type XS pumps work stably with less noise and vibration and can work at a lifting speed due to. Short Support at both sides, thus they can be widely used.
    2. The pipelines arrangement of type XS pump looks simple and beautiful due to inlet and outlet at a Same center line.
    3. The same rotor of type XS pumps can be operated at reverse direction to avoid damage to the pumps By water hammer.
    4. Unique design of type XS pumps working at high temperature using middle support to fasten the Pump casing and using cooling seals oil lubrication bearing then pump suitable for working at 200 degree Especially for suppling heated water to pipe net system.
    5. Type XS pump casting parts can be vertically or horizontally mounted acoording to different working Condition, with mechanical seals or packing seals.
    6. Type XS pumps look beautiful with visible lines adopting industrially designing.

    1. The efficiency of XS pumps are 2%~3% higher than the same type pumps due to adopting advanced Hydraulic model and thus minimum the operating costs.
    2. The NPSH of type XS pumps are 1-3 meters lower than the same type split pumps due to using Advanced hydraulic model and advanced manufacturing technique and thus minimize the foundation costs And extendling the using life.
    3. Type XS pumps are suitable for any site working condition due to using SKF NSK bearing and other Parts chosen by the customers and thus minimize the maintenance costs.
    1. It is very easy and simple to replace the mechanical seal due to usine container type machaniacl seal.
    2. It is rapid easy to assembly and dismout the rotor parts due to using elastic ripess assembling.
    3. It is unnecessary to make adjustment when assembling

    XS series Split Case Pump is widely used for water plant, irrigation, drainage pumping station, power station, water circulation of air-conditioning, industrial water supply system, fire system and shipping industry as well as for the general purpose in the oil refining industry.