Milestone Pump Co., Ltd ONLY PUMP, MORE THAN PUMP
banner
Home » Project » Content
Product Categories

Submersible Sewage Pump Introduction

- May 21, 2018 -

Submersible Sewage Pump Introduction

WQ.jpg

Cable outlet with core sealer

The self-contained core sealer of the cable outlet shuts the water out from penetrating into the motor chamber through the core wires even if the cable tip is immersed in water or the sheath is damaged.

Motor protector

A built-in automatic reset type motor protector (automatic cutoff or thermal protector) positively protects the motor from burnout due to overload, impeller clogging and open phase.

Motor

Air-filled submersible motor with Class E insulation is employed.

Shaft seal

A highly wear resistant silicon carbide double mechanical seal positively prevents the water from penetrating into the motor chamber. Besides, combined use of an oil seal further extends the service life of the mechanical seal.

Discharge connection

When the auto-connection type submersible pump is lowered along with the guide pipe, the pump is automatically connected to the discharge pipe with the Discharge connection.

Impeller

Impellers most suitable for respective pump applications are employed. For example, the non-clogging type channel impellers are 100% subject to the dynamic and static balance adjustment at factory.

Application:

•Treatment processes at septic tanks

•Treatment processes at sewage-treatment plants and night-soil treatment plants 

•Transfer Pumping station in the sewerage system 

•Effluent from building facilities as sanitary equipment 

•Draining rainwater from roads or underpass 

•Treatment processes at industrial water treatment facilities