Milestone Pump Co., Ltd ONLY PUMP, MORE THAN PUMP
Home » Project » Content
Product Categories

End-suction Centrifugal Pumps

- May 23, 2018 -

End-suction Centrifugal Pumps

The IS/ISA pumps have dimensions and nominal performances according to DIN 24 255 (10 bar) but are designed for 16 bar operation wherever the shaft seal type allows it. IS/ISA pumps according to DIN 24 256 (16 bar) are described in a separate booklet.

For a pump of the same model, the performance can be changed by trimming the outer diameter of the impeller. Only four shafts are required to cover the total range, and this gives many common interchangeable parts for pumps fitted to the same shaft. Just like the shaft, the bearing house has only five sizes for the whole series. The pump has a back pull-out design, and when a suitable spacer coupling is fitted to a direct coupled unit, The casing and motor can remain in position while all other pump parts can be removed for simple and quick maintenance. 

IS/ISA pump sets are comprised of IS/ISA pump and standard electric motor which are connected by coupling and mounted on a steel metal base. 

The advantage is that we could easily select the motor and couple to the IS/ISA pump. 

The coupling adopts the flexible pin and bush design, which makes the pump set more stable with minimal vibration and longer life-span as compared to the ‘claw-type’ coupling.

 The steel metal base is joined by profiled steel bar for strength. Fitting surface where the pump and motor foots seated, are lapped by machine with high precision. The coupling guard is designed to cover the coupling to provide greater safety and security.

Operating Condition

Flow Rate(Q) : 2 to 1150m3 /h 

Head(H) : 2 to 150m 

Speed : 1450, 2900 rpm (50Hz) 

Temperature : -10°C to 105°C standard, optional 150°C 

Using pressure: 10Bar standard, optional 16Bar

Section drawing and Parts list • Complete set

End suction centrifugal pump.jpg