Model NO.: D
Structure: Multistage Pump
Type: Jet Pump
Position of Pump Shaft: Horizontal Pump
Working Pressure: High Pressure Pump
HS Code: 841301090
Material: Cast Steel
Assembly: Liquid Pumps
Start Up: Electric Pump
Theory: Centrifugal Pump
Influent Type of Impeller: Single Suction Pump
Impeller Number: Multistage Pump
Origin: Hebei, China
D Type High Pressure Horizontal Multistage Pump uses national energy-saving hydraulic model, developed and updated constantly by our factory, with the advantage of high efficiency, wide range of performance, safety and smooth operation, low noise, easy installation and maintenance, long life, and its technology level is in the domestic leading position, product performance is reliable.
1. This series pump is a horizontal, single suction, multi stage centrifugal pump section, the suction is in horizontal direction, and outlet is vertical upward. Water suction, middle, discharge section, bearing housing and pump body are bolted into one strain, and select stages according to the pump head.
2. Rotor includes shaft, impeller, shaft sleeve, balance disk, and other parts. Axis parts are connected through the flat keys and the shaft nuts. The rotor is supported by the rotor bearings or sliding bearings in both ends, the bearing does not bear axial force, axial force is balanced by the balance disc. Bearings lubricated with grease, sliding bearings lubricated with light oil, and oil ring lubrication, and cooled by circulating water.
3. Shaft seal in the form of two kinds, mechanical seals and packing seal. When use packing seal, the packing ring should be placed at the right location, the tightness of packing must be appropriate to the liquid oozing drop by drop. Various sealing elements is in a sealed chamber, the chamber must be filled with some water, as water seal, water cooled or water lubrication. At the seal there is replacable sleeve, to protect the shaft.
4. From the motor direction, the pump is clockwise rotation.